燃氣發電機組保養工作應按規定的日保養、周保養、月保養要求進行，這樣才能延長燃氣發電機組的使用壽命，減少機組故障的出現。下面我們就來看一下燃氣發電機組的維護保養。

The maintenance work of gas generator sets should be carried out according to the prescribed daily, weekly, and monthly maintenance requirements, in order to extend the service life of gas generator sets and reduce the occurrence of unit failures. Now let's take a look at the maintenance and upkeep of gas generator sets.

　　1、潤滑系統的保養。該種類型機組由于存在運轉部件多,運轉部件工作條件惡劣,大多處在高溫、高沖擊載荷狀態下,需要潤滑的部位較多,對潤滑系統的可靠性要求較為苛刻,因此要注意檢查潤滑油系統的油質情況、油位情況、油溫和油壓情況,注意離心濾清器和機油濾清器的清洗,避免出現因潤滑不良造成的機組零部件磨損加劇,縮短機組零部件的使用壽命,加大維護工作量;

1. Maintenance of lubrication system. This type of unit has many operating components and harsh working conditions, most of which are in high temperature and high impact load conditions. There are many parts that need lubrication, and the reliability requirements of the lubrication system are relatively strict. Therefore, it is necessary to pay attention to checking the oil quality, oil level, oil temperature, and oil pressure of the lubrication oil system, and pay attention to cleaning the centrifugal filter and oil filter to avoid intensified wear of unit components caused by poor lubrication, shorten the service life of unit components, and increase maintenance workload;

　　2、空氣過濾器的保養。空氣過濾器天然氣發電機組如果運轉良好的話,將有效地避免因進氣阻力大引起的增壓壓力下降過大,進而造成渦輪增壓器出現漏油現象;還可避免因流量減少引起的渦輪增壓器壓氣機喘振現象。因此要定期清理空氣過濾器,必要時更換新濾芯。在潮濕地區可將紙質濾芯抽掉

2. Maintenance of air filters. If the natural gas generator set with air filter operates well, it will effectively avoid excessive pressure drop caused by high intake resistance, which will lead to oil leakage in the turbocharger; It can also avoid the phenomenon of turbocharger compressor surge caused by flow reduction. Therefore, it is necessary to regularly clean the air filter and replace it with a new filter element if necessary. Paper filter cartridges can be removed in damp areas

　　3.、相關間隙和角度的檢查和調整。主要是火花塞間隙、氣門間隙和配氣定時等的檢查和調整。

3. Inspection and adjustment of relevant gaps and angles. Mainly for inspection and adjustment of spark plug clearance, valve clearance, and valve timing.

　　通過這些規定的保養,能及時發現機組是否存在聲音異常、動作異常、外觀異常、溫度異常、壓力異常和氣味異常等故障現象,從而及時對機組進行檢查和調整,進而有針對性的加以解決,確保機組運行在最佳狀態。

Through these prescribed maintenance measures, it is possible to promptly detect any malfunctions such as abnormal sound, abnormal operation, abnormal appearance, abnormal temperature, abnormal pressure, and abnormal odor in the unit. This allows for timely inspection and adjustment of the unit, and targeted solutions to ensure that it operates at its optimal state.

　　本文由  燃氣發電機組 友情奉獻。更多有關的知識請點擊: http://pyucoin.com 真誠的態度，為您提供為全面的服務。更多有關的知識我們將會陸續向大家奉獻，敬請期待。

This article is dedicated to the friendship of gas generators. For more information, please click on: http://pyucoin.com Sincere attitude, providing you with comprehensive service. We will gradually contribute more relevant knowledge to everyone, please stay tuned.